1443
UnclassifiedGeneral
What This Code Means
Shutdown effect; During cranking battery voltage drops below operating voltage of control, resetting the control for three consecutive times
Possible Causes
- •Battery connections are loose or dirty
- •Battery unable to hold adequate voltage
- •Low electrolyte level in battery
- •Weak or discharged battery
Suggested Actions
- 1Check electrolyte level in the battery if battery voltage is low
- 2Check the electrolyte level if battery voltage is low.
- 3Measure the voltage of battery with voltmeter (should be 12VDC or greater for 12VDC system, 24VDC or greater for 24VDC system).
- 4Measure the voltage of the battery with a voltmeter (should be 12 VDC or greater in a 12 V system, or 24 VDC or greater in a 24 V system)
- 5Replace battery if battery cannot hold adequate voltage.
- 6Replace the battery if it cannot hold adequate voltage
- 7Replenish electrolyte level if low and recharge the battery (fully charged specific gravity approx. 1.260 at 80 °F / 27 °C)
- 8Replenish electrolyte level if low and recharge the battery (specific gravity of fully charged lead acid battery is approximately 1.26 at 80°F / 27°C).
ASK RUDY ABOUT THIS FAULT
Get a diagnosis walkthrough for 1443 on your specific Cummins unit — cited to the OEM manual, not a forum guess.
GET THE ANSWER
Free account required — we'll bring your question with you.