WARNING #5
UnclassifiedElectrical
What This Code Means
The mode of operation at that moment will be shut down immediately; Installation is supplied with a power higher than that which has been configured; Battery error LEDs are on (red)
Possible Causes
- •Maximum contracted power has been exceeded when the calendar is enabled and configured
- •Possible internal battery problem
- •One or more defective batteries
- •Possible internal problem of lotteries
Suggested Actions
- 1Configure the calendar (refer to Calendar section)
- 2Perform a system shutdown using the manual (do not turn the batteries off)
- 3Check that the batteries are working properly
- 4Check if the error LEDs are on (red)
- 5Check that the communication between the BMS of the batteries and the Cerbo GX is correct
- 6Check that the voltage between the DC terminals at the input of each of the inverters is correct
- 7Turn the batteries off and restart the equipment
- 8Check that the voltage between the DC terminals of the input of each of the inverters is correct
Related Hipower Systems Fault Codes
ASK RUDY ABOUT THIS FAULT
Get a diagnosis walkthrough for WARNING #5 on your specific Hipower Systems unit — cited to the OEM manual, not a forum guess.
TRY IT FREE