LOW COOLANT LEVEL
UnclassifiedCooling
What This Code Means
LOW COOLANT LEVEL Fault Lamp Illuminates
Possible Causes
- •Leaks in radiator, engine, or pipework
- •Low coolant level
Suggested Actions
- 1Allow engine to cool.
- 2Check coolant level and fill as required with correct coolant mixture (do not add large amounts of cold water to a hot engine).
- 3Check radiator, engine, and pipework for leaks and repair as necessary.
- 4Clear the fault lamp by turning the Control Switch to STOP (for 2001 panel) or by pressing the P.C.B RESET button (for 4001 and 4001E panels).
- 5After engine has cooled, check coolant level. Do not add large amounts of cold water to a hot engine as serious damage could result.
- 6Allow radiator to cool and check coolant level
- 7Check ambient temperature is within the design limits of the generator set.
- 8Check engine was not overloaded.
- 9Check fan belt tension.
- 10Check oil level
- 11Check radiator obstructions.
- 12Clear the fault lamp by turning the Control Switch to 'STOP' for the 2001 panel or by pressing the P.C.B RESET button on the 4001 and 4001E panels
- 13Ensure proper maintenance procedures have been carried out
- 14Press the P.C.B RESET button (for 4001 and 4001E panels) to acknowledge and reset the system
- 15Press the P.C.B RESET button (for 4001 and 4001E panels) to reset the fault
- 16Rectify the fault before trying to restart
- 17Refer to Engine Manual
- 18Refer to troubleshooting guide on 'Engine Stops Due To High Engine Temp' to see if cooling system is operating efficiently
- 19Turn the Control Switch to 'STOP' (for 2001 panel) to acknowledge and reset the system
- 20Turn the Control Switch to STOP (for the 2001 panel) to reset the fault
Related General Fault Codes
ASK RUDY ABOUT THIS FAULT
Get a diagnosis walkthrough for LOW COOLANT LEVEL on your specific General unit — cited to the OEM manual, not a forum guess.
GET THE ANSWER
Free account required — we'll bring your question with you.