Shindaiwa

ECU P - OIL

UnclassifiedLubrication

What This Code Means

Engine oil pressure drops below 14 psi (0.98 x 100 kPa); Engine automatically stops; Charging is not possible during operation; Engine speed exceeds 2,070 rpm during operation; Liquid stored in the spill containment exceeds approximately 8 gal. (30.3 liters); Engine oil pressure drops below 14 psi (0.98 x 100 kPa) during operation; Low oil pressure; Battery charging is not possible during operation; Insufficient battery charge; Engine overspeed; Liquid stored in the spill containment exceeds approximately 12 gal (45.4 liters) during operation

Possible Causes

  • •Low engine oil level
  • •Alternator charging failure
  • •Engine malfunction
  • •Fluid accumulation in the spill containment
  • •Alternator failure
  • •High liquid level in the spill containment

Suggested Actions

  1. 1Check the engine oil level
  2. 2Add engine oil until it reaches the maximum level
  3. 3Contact authorized distributor where the generator was purchased
  4. 4Immediately stop the engine
  5. 5Flush the liquid stored in the spill containment

Related Shindaiwa Fault Codes

OIL PRESSECU ENGINESPEEDECU ENGINESP EEDBATTERY* WRN SPILL CONTAINMENT FLUID LEVEL CHECK* WRN CHARGING ALTERNATOR FAILENGINEOVER SPEEDSD T-COOLANT
Browse all Shindaiwa fault codes

ASK RUDY ABOUT THIS FAULT

Get a diagnosis walkthrough for ECU P - OIL on your specific Shindaiwa unit — cited to the OEM manual, not a forum guess.

TRY IT FREE