Shindaiwa

ECU ENGINESP EED

UnclassifiedLubrication

What This Code Means

Engine oil pressure drops below 14 psi (0.98 x 100 kPa); Engine automatically stops; Charging is not possible during operation; Engine speed exceeds 2,070 rpm during operation; Liquid stored in the spill containment exceeds approximately 8 gal. (30.3 liters)

Possible Causes

  • •Low engine oil level
  • •Alternator charging failure
  • •Engine malfunction
  • •Fluid accumulation in the spill containment

Suggested Actions

  1. 1Check the engine oil level
  2. 2Add engine oil until it reaches the maximum level
  3. 3Contact authorized distributor where the generator was purchased
  4. 4Immediately stop the engine
  5. 5Flush the liquid stored in the spill containment

Related Shindaiwa Fault Codes

ECU ENGINESPEEDECU P - OILBATTERYOIL PRESS* WRN SPILL CONTAINMENT FLUID LEVEL CHECK* WRN CHARGING ALTERNATOR FAILENGINEAIR FILTER
Browse all Shindaiwa fault codes

ASK RUDY ABOUT THIS FAULT

Get a diagnosis walkthrough for ECU ENGINESP EED on your specific Shindaiwa unit — cited to the OEM manual, not a forum guess.

TRY IT FREE