Shindaiwa

ECU ENGINESPEED

UnclassifiedLubrication

What This Code Means

Engine oil pressure drops below 14 psi (0.98 x 100 kPa) during operation; Engine automatically stops; Low oil pressure; Battery charging is not possible during operation; Insufficient battery charge; Engine speed exceeds 2,070 rpm during operation; Engine overspeed; Liquid stored in the spill containment exceeds approximately 12 gal (45.4 liters) during operation

Possible Causes

  • •Low engine oil level
  • •Alternator failure
  • •Engine malfunction
  • •High liquid level in the spill containment

Suggested Actions

  1. 1Check the engine oil level
  2. 2Add engine oil until it reaches the maximum level
  3. 3Contact authorized distributor where the generator was purchased
  4. 4Immediately stop the engine
  5. 5Flush the liquid stored in the spill containment

Related Shindaiwa Fault Codes

ECU P - OILOIL PRESSECU ENGINESP EEDBATTERY* WRN SPILL CONTAINMENT FLUID LEVEL CHECK* WRN CHARGING ALTERNATOR FAILENGINEOVER SPEED
Browse all Shindaiwa fault codes

ASK RUDY ABOUT THIS FAULT

Get a diagnosis walkthrough for ECU ENGINESPEED on your specific Shindaiwa unit — cited to the OEM manual, not a forum guess.

TRY IT FREE