SD T-COOLANT
UnclassifiedCooling
What This Code Means
Engine speed is too fast (2,070 rpm or more); Breaker trip; Engine automatic shutdown; Spill containment fluid level check alarm; Air filter clogging up alarm; Fuel level low alarm; Overcurrent alarm; Terminal cover open alarm; Engine startup failure; Coolant temperature rises above 212 °F (100 °C) during operation; Generator overheats; Hot steam gushing out from the coolant sub-tank; Engine automatically stopped; Engine overspeed; Controller display alarm; Over crank alarm; High Water Temperature; Coolant temperature rises above 212 °F (100 °C); Hot steam gushes out from the coolant sub-tank
Possible Causes
- •Engine speed is too fast (2,070 rpm or more)
- •Spill containment accumulated fluid has exceeded the specified level
- •Air filter element is clogged
- •The amount of fuel is small
- •Overcurrent condition
- •Terminal cover is opened
- •Engine startup failure
- •Coolant level is insufficient
- •Fan belt is loose
- •Coolant leak
- •The air filter element is clogged
- •Activates in overcurrent
Suggested Actions
- 1Press the FAULT RESET button to clear the alarm
- 2Flush the fluid
- 3Clean or replace the element
- 4Wait for the engine to cool down
- 5Check the coolant sub-tank coolant level after the generator cools
- 6Add coolant to the coolant sub-tank if it is insufficient
- 7Inspect for a loose fan belt
- 8Inspect for a coolant leak
- 9Resolve the reason and press the FAULT RESET button to clear the alarm
- 10Clean the element
- 11Replace the element
- 12Wait for the generator to cool, check the coolant sub-tank coolant level, and add coolant to the coolant sub-tank if it is insufficient
- 13Wait for the engine to cool down and inspect for a loose fan belt or a coolant leak
Related Shindaiwa Fault Codes
ASK RUDY ABOUT THIS FAULT
Get a diagnosis walkthrough for SD T-COOLANT on your specific Shindaiwa unit — cited to the OEM manual, not a forum guess.
TRY IT FREE