AF

UnclassifiedCooling

What This Code Means

Controller display shows AF; Generator set engine will not start; Shutdown occurs if the engine coolant temperature exceeds the maximum temperature for more than 5 seconds; Shutdown occurs if a low oil pressure condition exists for more than 5 seconds; Shutdown occurs after 3 unsuccessful starting attempts; No engine rotation is sensed during cranking

Possible Causes

  • •An optional customer-connected input is closed
  • •Battery issue
  • •Blocked air inlets and exhaust outlets
  • •Customer-supplied auxiliary fault switch closed (input grounded)
  • •Emergency stop button activated
  • •Fuel supply issue
  • •Input from a customer-supplied switch closes when fault is active (input is grounded)
  • •Leaks in the lubrication system
  • •Loose connections
  • •Low oil level
  • •Spark plug issue

Suggested Actions

  1. 1Check customer-supplied equipment
  2. 2Check for blocked air inlets and exhaust outlets
  3. 3Check for leaks in the lubrication system
  4. 4Check for loose connections
  5. 5Check that the knob returns to the deactivated (out) position
  6. 6Check the battery
  7. 7Check the cause of the auxiliary fault
  8. 8Check the fuel supply
  9. 9Check the oil level and add oil if the level is low
  10. 10Check the oil level at the engine
  11. 11Check the spark plug
  12. 12Contact an authorized distributor/dealer for service if problem continues
  13. 13Investigate and correct the cause of the emergency stop
  14. 14Move the generator set master switch to the RUN or AUTO position to restart the generator set
  15. 15Place the generator set master switch in the OFF/RESET position
  16. 16Rotate the emergency stop switch knob clockwise and release it
  17. 17Verify that the controller display no longer shows a fault code

ASK RUDY ABOUT THIS FAULT

Get a diagnosis walkthrough for AF on your specific Rehlko unit — cited to the OEM manual, not a forum guess.

GET THE ANSWER

Free account required — we'll bring your question with you.