Deep Sea Electronics

6771

UnclassifiedFuel

What This Code Means

CAN control non-functional; Current consumption exceeds DSE unit output specification; Fuel Relay Output failure; CANbus communication errors

Possible Causes

  • •Deutz ECU parameter 4400 not enabled
  • •Direct connection to high-draw component (Fuel Relay or Start Relay)
  • •Incorrect module configuration
  • •Incorrect cable impedance
  • •Unscreened cable
  • •Incorrect screen grounding

Suggested Actions

  1. 1Using the Deutz service tool software, change parameter 4400 on Page 6 to ‘1’
  2. 2Install an external slave relay
  3. 3Check current consumption against DSE unit output specification
  4. 4Configure the Fuel Relay Output to CAN ECU Power
  5. 5Use only screened 120 Ω impedance cable approved for CANbus applications
  6. 6Connect CANbus cable screen at one end only

Related Deep Sea Electronics Fault Codes

627974367791AIR FILTER MAINTENANCE ALARMALARM 60ANALOGUE INPUT CONFIGURED AS DIGITALAUXILIARY INPUTSCAN 1 NODE LOST 180
Browse all Deep Sea Electronics fault codes

ASK RUDY ABOUT THIS FAULT

Get a diagnosis walkthrough for 6771 on your specific Deep Sea Electronics unit — cited to the OEM manual, not a forum guess.

TRY IT FREE