1438
UnclassifiedSpeed
What This Code Means
Engine failed to crank after the generator control received a start signal; Generator set output current has exceeded the warning limit threshold for greater than the fixed time delay; Generator set output current has exceeded the shutdown limit threshold for greater than the fixed time delay; Engine RPM has decreased to zero while not in run at rated mode; Engine RPM has decreased to zero, while not in run at rated mode
Possible Causes
- •Dead or weak battery
- •Failed starter
- •Generator set overload
- •Incorrect calibration in the PowerCommand control
Suggested Actions
- 1Verify battery voltage is at least 12 VDC (or 24 VDC if applicable)
- 2Charge or replace the battery as necessary
- 3Press the Reset/Fault acknowledge button on the display
- 4Attempt to start the generator and test for B+ at the starter supply lug
- 5If B+ is present at the starter supply lug, the starter could be defective
- 6Reduce the generator set load by powering off unnecessary electrical loads
- 7Check if starter is defective if B+ is present at the starter supply lug
Related Cummins Fault Codes
ASK RUDY ABOUT THIS FAULT
Get a diagnosis walkthrough for 1438 on your specific Cummins unit — cited to the OEM manual, not a forum guess.
TRY IT FREE