OVERVOLTAGE

UnclassifiedGeneral

What This Code Means

Overvoltage fault or event message displayed; Undervoltage fault or event message displayed

Possible Causes

  • •Calibration error
  • •Faulty or loose source connections
  • •High battery voltage
  • •High engine temperature
  • •Incorrect voltage settings
  • •Loose or faulty source connections
  • •Loose source connections or wiring fault
  • •Low battery voltage
  • •Low oil pressure
  • •Overcrank safety
  • •Overfrequency
  • •Overspeed
  • •Overvoltage
  • •Source availability or stability issue
  • •Source availability or stability issues
  • •Source availability, stability issues
  • •Underfrequency
  • •Undervoltage
  • •Voltage settings
  • •Voltage settings incorrect
  • •Voltage settings mismatch or incorrect pickup/dropout/debounce settings

Suggested Actions

  1. 1Check for loose connections
  2. 2Check for loose connections and check wiring
  3. 3Check that the source voltage matches the nominal system voltage and stays within the range of the pickup and dropout settings
  4. 4Check that the system voltage setting matches the actual source voltage
  5. 5Check that the voltage debounce setting is long enough to prevent nuisance faults caused by brief voltage dips or spikes
  6. 6Check the ATS calibration
  7. 7Check the ATS meter calibration (See TP-6135, Setup Program Operation Manual)
  8. 8Check the over/undervoltage pickup and dropout settings
  9. 9Check the over/undervoltage pickup and dropout settings (See Section 3.9.3 and the Setup Program Operation Manual)
  10. 10Check wiring

ASK RUDY ABOUT THIS FAULT

Get a diagnosis walkthrough for OVERVOLTAGE on your specific Rehlko unit — cited to the OEM manual, not a forum guess.

GET THE ANSWER

Free account required — we'll bring your question with you.