OVERFREQUENCY
UnclassifiedGeneral
What This Code Means
Overfrequency fault or event message displayed; Underfrequency fault or event message displayed
Possible Causes
- •Faulty or loose source connections
- •Frequency settings
- •Frequency settings incorrect
- •Frequency settings mismatch or incorrect pickup/dropout/debounce settings
- •High battery voltage
- •High engine temperature
- •Incorrect frequency settings
- •Loose or faulty source connections
- •Loose source connections or wiring fault
- •Low battery voltage
- •Low oil pressure
- •Overcrank safety
- •Overfrequency
- •Overspeed
- •Overvoltage
- •Source availability or stability issue
- •Source availability or stability issues
- •Source availability, stability
- •Source availability, stability issues
- •Source connections
- •Source frequency is above the over frequency dropout setting
- •Underfrequency
- •Undervoltage
Suggested Actions
- 1Check for loose connections
- 2Check for loose connections and check wiring
- 3Check that the frequency debounce setting is long enough to prevent nuisance faults caused by brief frequency variations
- 4Check that the source frequency matches the nominal system frequency and stays within the range of the pickup and dropout settings
- 5Check that the system frequency setting matches the actual source frequency (50 or 60 Hz)
- 6Check the over/under frequency pickup and dropout settings
- 7Check the over/underfrequency pickup and dropout settings
- 8Check the over/underfrequency pickup and dropout settings (See Section 3.9.3 and the Setup Program Operation Manual)
- 9Check wiring
Related Rehlko Fault Codes
ASK RUDY ABOUT THIS FAULT
Get a diagnosis walkthrough for OVERFREQUENCY on your specific Rehlko unit — cited to the OEM manual, not a forum guess.
GET THE ANSWER
Free account required — we'll bring your question with you.