HIGH TEMPERATURE

UnclassifiedCooling

What This Code Means

Unit shuts down during operation

Possible Causes

  • •Blocked or restricted ventilation around the generator, intake, exhaust, or rear of generator
  • •High temperature
  • •Ventilation obstruction around generator, intake, exhaust, or rear of generator
  • •Obstruction of ventilation around generator, intake, exhaust, or rear of generator
  • •Ventilation obstructions around generator intake, exhaust, or rear of generator
  • •High operating temperature
  • •Obstruction around generator ventilation, intake, exhaust, or rear
  • •Obstructions in ventilation around unit, intake, exhaust, or rear of unit
  • •Ventilation obstructions around generator, intake, exhaust, or rear of generator
  • •Ventilation obstruction around intake, exhaust, or rear of generator
  • •Obstruction in ventilation around intake, exhaust, or rear of generator
  • •Obstruction in ventilation around generator, intake, exhaust, or rear of generator
  • •Engine overheating
  • •Blocked ventilation around intake, exhaust, or rear of generator
  • •High temperature condition
  • •Blocked intake, exhaust, or rear generator ventilation
  • •Obstructions around ventilation, intake, exhaust, or rear of generator

Suggested Actions

  1. 1Check the LEDs / screen for alarms
  2. 2Check the LEDs/Screen for alarms
  3. 3Check ventilation around the generator, intake, exhaust and rear of generator
  4. 4Check ventilation around the generator, intake, exhaust, and rear of generator
  5. 5If no obstruction contact servicing dealer
  6. 6If no obstructions are present, contact an IASD
  7. 7To clear an active alarm, press the OFF button, the EN TER button, and then press AUTO. If the alarm reoccurs, contact an IASD.
  8. 8If no obstruction, contact Independent Authorized Service Dealer
  9. 9Check LEDs / screen for alarms
  10. 10Check ventilation around unit, intake, exhaust, and rear of unit
  11. 11To clear active alarm: press OFF mode button on control panel, press ENTER, then press AUTO mode button
  12. 12Inspect ventilation around generator, intake, exhaust, and rear of generator
  13. 13Inspect ventilation around intake, exhaust, and rear of generator
  14. 14Contact an IASD if no obstruction is found
  15. 15Check ventilation around the intake, exhaust and rear of generator
  16. 16Contact servicing dealer if no obstruction is found
  17. 17If no obstruction, contact servicing dealer

ASK RUDY ABOUT THIS FAULT

Get a diagnosis walkthrough for HIGH TEMPERATURE on your specific Generac unit — cited to the OEM manual, not a forum guess.

GET THE ANSWER

Free account required — we'll bring your question with you.