305
UnclassifiedGeneral
What This Code Means
Unit (or System) Rogue Module Found; Channel Charger assigned to a disabled channel.; Unable to verify the channel DC output current and power ratings.
Possible Causes
- •Adding a charger module from another system
- •Adding a module from another system
- •Charger is assigned to a disabled channel.
- •Charger module found with a Unit Serial Number that does not match any display found on the bus
- •Disconnected or damaged SENSbus data cables
- •Miswired, disconnected, or damaged input and output connections
- •Unit Serial Number does not match any display found on the bus
Suggested Actions
- 1Check for disconnected or damaged SENSbus data cables.
- 2Check for miswired, disconnected, or damaged input and output connections.
- 3Enable the channel using the keypad 'DC Output #' selection in the 'DC -> Advanced Settings' menu or the setup utility.
- 4Fix Unit Serial Numbers on all chargers, modules, and Accessory boards
- 5Fix Unit Serial Numbers on all chargers/modules and Accessory boards
- 6Set charger for non-channelized operation (0, Default output) or to a valid output channel that is enabled in this unit or system.
- 7Verify that the DC outputs of all chargers assigned to this channel are electrically connected to that output bus.
Related Stored Energy Systems LLC Fault Codes
ASK RUDY ABOUT THIS FAULT
Get a diagnosis walkthrough for 305 on your specific Stored Energy Systems LLC unit — cited to the OEM manual, not a forum guess.
TRY IT FREE