Stored Energy Systems LLC

104

UnclassifiedGeneral

What This Code Means

Invalid output channel; No chargers assigned to output channel; Charger has failed; Charger has lost SENSbus data communication; Charger has incorrect channel setting

Possible Causes

  • •Charger not set to use a valid output channel
  • •Chargers must be set to use a valid output channel setting
  • •Every enabled output channel must have at least one charger assigned to it
  • •Output channel setting is incorrect

Suggested Actions

  1. 1Check for a charger that has failed (indicated by its LED status)
  2. 2Check for disconnected or damaged SENSbus data cables
  3. 3Disable the output channel if it is not to be used by using the keypad 'DC Output #' setting in the 'DC -> Advanced Settings' menu or the setup utility
  4. 4Enable the channel using the keypad 'DC Output #' selection in the 'DC -> Advanced Settings' menu or the setup utility
  5. 5Enable the channel using the keypad 'DC Output #' selection in the 'DC -> Advanced Settings' menu or the setup utility.
  6. 6Reassign the charger to match its actual output channel connection using the setup utility
  7. 7Reassign the charger to match its actual output channel connection using the setup utility.
  8. 8Use output A for single output units

Related Stored Energy Systems LLC Fault Codes

2012020X082030X013050X0AAC FREQUENCY OUT OF RANGE0X00AC LINE FAILAC VOLTAGE HIGHAC VOLTAGE LOW
Browse all Stored Energy Systems LLC fault codes

ASK RUDY ABOUT THIS FAULT

Get a diagnosis walkthrough for 104 on your specific Stored Energy Systems LLC unit — cited to the OEM manual, not a forum guess.

TRY IT FREE