155
UnclassifiedCooling
What This Code Means
Engine has overheated; Intake manifold temperature has risen above the shutdown trip point; Engine coolant level has fallen below the trip point
Possible Causes
- •Coolant leakage
- •High ambient temperature
- •Higher ambient temperature
- •Increase in load
- •Intake manifold temperature reached shutdown trip point
- •Large load
- •The engine controller has sensed a fault condition and is broadcasting the fault message
Suggested Actions
- 1Check coolant level and replenish if low
- 2Consult the engine service manual
- 3If the engine can be stopped, allow the engine to cool down completely before proceeding
- 4If the generator is powering critical loads and cannot be shut down, wait until the next shutdown period
- 5Look for possible coolant leakage points and repair if necessary
- 6Reset the control and restart after locating and correcting the problem
- 7Review fault code 151 correction list for other possible causes
ASK RUDY ABOUT THIS FAULT
Get a diagnosis walkthrough for 155 on your specific Cummins unit — cited to the OEM manual, not a forum guess.
GET THE ANSWER
Free account required — we'll bring your question with you.