1

UnclassifiedCooling

What This Code Means

Generator set shutdown; Generator set runs out of fuel first (when sharing a common fuel tank with vehicle engine); Engine coolant temperature exceeded 115 °C (239 °F) for 10 seconds during normal operation; Low oil pressure cutoff switch did not open; Service check required; Engine cranking exceeded 30 seconds without starting

Possible Causes

  • •Active second-level fault code
  • •Blocked air inlet or outlet opening on the bottom of the generator set
  • •Coolant leaks
  • •Dirt fouling the radiation fins
  • •Dirty or loose battery connections
  • •Engine coolant temperature is above normal and has reached the shutdown trip point for the configured time delay
  • •Engine fails to start
  • •Engine oil is above the full mark on the dipstick
  • •Engine oil is low
  • •Excessive connected load (e.g., air conditioners and battery chargers)
  • •Fuel dip tubes are arranged so that the generator set will run out of fuel first
  • •High coolant temperature fault condition
  • •Low coolant level
  • •Low engine oil level
  • •Low fuel level
  • •Overloading the generator set

Suggested Actions

  1. 1Add oil if the dipstick indicates oil is low
  2. 2Check engine coolant level, add coolant as necessary, and repair any leaks
  3. 3Clean dirt out of radiation fins (compressed air or washing with water can be used; do not use a pressure washer or allow copious amounts of water to enter components)
  4. 4Do not overload the generator set
  5. 5Drain excess oil if oil is above the full mark on the dipstick
  6. 6Keep battery connections clean and tight
  7. 7Maintain engine oil level
  8. 8Mark the generator set empty point on the fuel gauge to make it easier to tell when to stop the generator set before running it out of fuel
  9. 9Reduce the number of connected appliances
  10. 10Remove objects blocking air inlet or outlet openings on the bottom of the generator set
  11. 11Repair by site personnel
  12. 12Request service by trained and experienced service personnel if site personnel cannot resolve the problem
  13. 13See second-level fault code
  14. 14Watch the fuel gauge

Related Cummins Fault Codes

ASK RUDY ABOUT THIS FAULT

Get a diagnosis walkthrough for 1 on your specific Cummins unit — cited to the OEM manual, not a forum guess.

GET THE ANSWER

Free account required — we'll bring your question with you.