Rehlko

FAULT

UnclassifiedGeneral

What This Code Means

Generator set has shut down due to a fault

Possible Causes

  • •An unspecified fault condition

Suggested Actions

  1. 1Disconnect the generator set from the load using the line circuit breaker or automatic transfer switch.
  2. 2Correct the cause of the fault shutdown.
  3. 3Start the generator set by moving the generator set master switch to RESET/OFF and then to RUN.
  4. 4Verify that the cause of the shutdown has been corrected by test operating the generator set.
  5. 5Reconnect the generator set to the load using the line circuit breaker or automatic transfer switch.
  6. 6Move the generator set master switch to the AUTO position for startup by remote transfer switch or remote start/stop switch.

Related Rehlko Fault Codes

FREQUENCY HIGH SD *FREQUENCY LOW SD *EXER NOT SCH WGENERATOR FREQUENCY HIGH SDEXER NOT SCHGENERATOR FREQUENCY LOW SDESGENERATOR VOLTAGEL1-L2 HIGH SDEMERGENCY STOPGENERATOR VOLTAGEL1-L2 LOW SDCONCHECKINGHET
Browse all Rehlko fault codes

ASK RUDY ABOUT THIS FAULT

Get a diagnosis walkthrough for FAULT on your specific Rehlko unit — cited to the OEM manual, not a forum guess.

TRY IT FREE