Himoinsa

EN

UnclassifiedCooling

What This Code Means

Engine stops; Controller produces an acoustic signal; RESET button LED flashes; Display blinks; Digital alarm output (AL) is activated; High coolant temperature; Display shows 'HIGH TEMPERATURE WATER'; LED of the RESET button flashes; Display shows active alarm 'EN' / 'HIGH TEMPERATURE WATER'; Acoustic alarm sounds; High coolant temperature / HIGH TEMPERATURE WATER

Possible Causes

  • •Low engine coolant level
  • •High engine temperature
  • •Low coolant level

Suggested Actions

  1. 1Press the RESET button once to interrupt the acoustic alarm
  2. 2Reduce the temperature of the engine
  3. 3Check the engine coolant level
  4. 4Press the RESET button once the alarm is no longer active ('N') to reset and restart the engine
  5. 5Check the coolant level of the engine
  6. 6Wait until the alarm is no longer active ('N'), then press the RESET button to reset and restart the engine
  7. 7Reduce the engine temperature
  8. 8Check the engine coolant level to detect the cause of the failure
  9. 9Press the RESET button once the alarm is no longer active ("N") to reset and restart the engine

Related Himoinsa Fault Codes

FRFUEL RESERVEEMSHCTCLHIGH COOLANT TEMPERATURE BY SENSORBATTERY CHARGE ALTERNATOR FAILUREHIGH TEMPERATURE WATERANHTCALARMS TABLE PARAMETERS 73 TO 74LOP
Browse all Himoinsa fault codes

ASK RUDY ABOUT THIS FAULT

Get a diagnosis walkthrough for EN on your specific Himoinsa unit — cited to the OEM manual, not a forum guess.

TRY IT FREE