2542
UnclassifiedFuel
What This Code Means
Voltage bias circuit output is out of range (high or low)
Possible Causes
- •Faulty Fuel Level Sensor
- •Faulty Fuel Level Sensor Connections
- •Improper Wiring
- •Voltage bias circuit output is out of range (OOR), high or low
- •Voltage bias circuit output out of range
Suggested Actions
- 1Check wires for breaks or abrasions
- 2Check wires for moisture and debris at connection points
- 3Disconnect the engine harness connector from the fuel level sensor and inspect connector pins for corroded, bent, broken, pushed back, or expanded pins
- 4Disconnect the engine harness connector from the fuel level sensor and measure the resistance between the fuel level sensor signal pin and return pin
- 5Ensure wiring from the coolant temperature sensor is connected to the correct Aux 101 input
- 6Inspect fuel level sensor and engine harness connector for evidence of moisture, missing or damaged seals, and dirt or debris
- 7Using the InSite Service tool, verify calibration in the ECM and update to the latest calibration on QSOL if required
- 8Using the display or InPower Service tool, verify calibration in the PCC control and update to the latest calibration on the InCal website if required
ASK RUDY ABOUT THIS FAULT
Get a diagnosis walkthrough for 2542 on your specific Cummins unit — cited to the OEM manual, not a forum guess.
GET THE ANSWER
Free account required — we'll bring your question with you.