2224
UnclassifiedFuel
What This Code Means
Fuel level sensor voltage is out of range
Possible Causes
- •Faulty Fuel Level Sensor
- •Faulty Fuel Level Sensor Connections
- •Improper Wiring
Suggested Actions
- 1Check wires for breaks or abrasions
- 2Check wires for moisture and debris at connection points
- 3Disconnect the engine harness connector from the fuel level sensor and inspect connector pins for corroded, bent, broken, pushed back, or expanded pins
- 4Disconnect the engine harness connector from the fuel level sensor and measure the resistance between the fuel level sensor signal pin and return pin
- 5Ensure wiring from the coolant temperature sensor is connected to the correct Aux 101 input
- 6Inspect fuel level sensor and engine harness connector for evidence of moisture, missing or damaged seals, and dirt or debris
- 7Using the InSite Service tool, verify calibration in the ECM and update to the latest calibration on QSOL if required
- 8Using the display or InPower Service tool, verify calibration in the PCC control and update to the latest calibration on the InCal website if required
- 9Disconnect the engine harness connector from the fuel level sensor
- 10Inspect for corroded pins, bent or broken pins, pushed back or expanded pins
- 11Inspect the fuel level sensor and the engine harness connector pins
- 12Correct the wiring
- 13Measure the resistance of the fuel sender at the day tank
- 14Replace the fuel sender
ASK RUDY ABOUT THIS FAULT
Get a diagnosis walkthrough for 2224 on your specific Cummins unit — cited to the OEM manual, not a forum guess.
GET THE ANSWER
Free account required — we'll bring your question with you.