1625

Possible Causes

• •Fault in the slave ECM requiring engine shutdown
• •Shutdown request triggered by another device connected to the CAN network (such as genset controllers or pump controllers)

Suggested Actions

1. 1Connect to the slave ECU and check all stored fault codes to find the fault that triggered the shutdown on the master side
2. 2Change Comm Port (Configure ECOM) to Target CAN Address 1 to access the secondary side ECM
3. 3Check other devices connected to the CAN network capable of triggering an engine shutdown (such as genset controllers or pump controllers) if no stored faults are found on the slave ECM

Related Power Solutions International Fault Codes