VOLTS L1-L2 HIGH

UnclassifiedCooling

What This Code Means

Three unsuccessful starting attempts; Engine speed sensor failure; Engine stalled; Generator voltage high; Output voltage exceeds 120% of the system nominal voltage for more than 2 seconds; Generator voltage low; Output voltage falls below 80% of the nominal system voltage for more than 10 seconds

Possible Causes

  • •Battery issue
  • •El voltaje de salida excede el 120 % del voltaje nominal del sistema durante más de 2 segundos
  • •Failed engine speed sensor
  • •Fuel supply issue
  • •Generator voltage high
  • •Generator voltage low
  • •La tension de sortie dépasse 120 % de la tension nominale du système pendant plus de 2 s
  • •Loose connections
  • •Output voltage is >120% of the nominal voltage for more than 2 seconds
  • •Spark plug issue

Suggested Actions

  1. 1Check battery
  2. 2Check enclosure thermostat and reset if tripped (Model 20RESC/20RESCL only)
  3. 3Check for loose connections
  4. 4Check fuel supply
  5. 5Check spark plug
  6. 6Contact an authorized distributor/dealer for service
  7. 7Contact authorized dealer/distributor for service
  8. 8Contacte con un distribuidor o proveedor autorizado para solicitar mantenimiento
  9. 9Reduce the load
  10. 10Restart the generator set
  11. 11S’adresser à un concessionnaire/ réparateur agréé.
  12. 12S’adresser à un concessionnaire/réparateur agréé

ASK RUDY ABOUT THIS FAULT

Get a diagnosis walkthrough for VOLTS L1-L2 HIGH on your specific Rehlko unit — cited to the OEM manual, not a forum guess.

GET THE ANSWER

Free account required — we'll bring your question with you.