SOLID GREEN SOLID YELLOW

UnclassifiedElectrical

What This Code Means

AC good, low battery voltage

Possible Causes

  • •Alarm setpoint incorrect for application
  • •Battery discharged or defective
  • •Failed internal battery

Suggested Actions

  1. 1Check that unit settings and alarms are set appropriately
  2. 2If AC voltage check and power cycling do not resolve the RED AC light, replace the unit.
  3. 3If AC voltage check does not resolve the RED AC light, press the 'Sleep' button and remove AC power for 1 minute, then reapply power.
  4. 4If settings and alarms are correct, check and correct high output/load voltage due to any other connected equipment
  5. 5Measure that output voltage is correct at battery terminals and/or output current is present
  6. 6Replace unit if settings and alarms are correct and battery voltage is not improving
  7. 7Using a voltmeter, check that AC input voltage and frequency are in the range 80VAC – 265VAC / 47Hz – 63Hz or that >8VDC is present at DC output terminals. Correct charger AC input voltage as required.
  8. 8Verify AC is present and battery is being charged. Measure that output voltage is correct at battery terminals and/or output current is present. If settings and alarms are correct and battery voltage is not improving, replace the unit.
  9. 9Verify battery is being charged

ASK RUDY ABOUT THIS FAULT

Get a diagnosis walkthrough for SOLID GREEN SOLID YELLOW on your specific Stored Energy Systems LLC unit — cited to the OEM manual, not a forum guess.

GET THE ANSWER

Free account required — we'll bring your question with you.