FUSE PROBLEM
UnclassifiedGeneral
What This Code Means
Unit will not start in AUTO with utility loss
Possible Causes
- •Bad 7.5 Amp fuse
- •Blown or bad 7.5 Amp fuse
- •Bad 7.5amp fuse
- •Bad ATO 7.5 amp fuse
Suggested Actions
- 1Check LEDs/Screen for alarms
- 2Check the 7.5 Amp fuse
- 3If fuse is bad, replace it with an ATO 7.5 Amp fuse
- 4If fuse is not bad, contact servicing dealer
- 5Check the LEDs / Screen for alarms
- 6Check the 7.5amp fuse
- 7If fuse is bad, replace it with an ATO 7.5Amp fuse
- 8If fuse is not bad, contact Independent Authorized Service Dealer
- 9Check ATO 7.5 amp fuse
- 10Replace with same type fuse if bad
- 11Contact an IASD if fuse is good
- 12Contact servicing dealer if fuse is good
Related Generac Fault Codes
ASK RUDY ABOUT THIS FAULT
Get a diagnosis walkthrough for FUSE PROBLEM on your specific Generac unit — cited to the OEM manual, not a forum guess.
GET THE ANSWER
Free account required — we'll bring your question with you.