Multiquip

FDS

UnclassifiedGeneral

What This Code Means

Machine goes into shutdown mode; Driving functions are deactivated; Engine continues to run while driving functions are deactivated

Possible Causes

  • •The minimum distance between the transmitter and the receiver eye is less than 6 ft (2 meters)
  • •The maximum distance between the transmitter and receiver eye (approximately 65 ft to 75 ft / 20 - 24 meters, depending on weather conditions) is exceeded

Suggested Actions

  1. 1Increase the distance between the transmitter and the receiver eye to at least 6 ft (2 meters)
  2. 2Bring the transmitter within the maximum distance from the receiver eye

Related Multiquip Fault Codes

FIGURA 70FIGURA 71F8FIGURA 72F6FLASH REDF0FLASHING REDEATS ERRORFLASHING YELLOWE-STOP SD ACTIVEFLASHING YELLOW AND BUZZER
Browse all Multiquip fault codes

ASK RUDY ABOUT THIS FAULT

Get a diagnosis walkthrough for FDS on your specific Multiquip unit — cited to the OEM manual, not a forum guess.

TRY IT FREE