FAILED TO START
UnclassifiedSpeed
What This Code Means
Engine fails to start; Starter motor disengages and enters rest mode during cranking; Start sequence is stopped; Start sequence stopped; Display shows 'FAILED TO START'; Engine stops; Shutdown icon flashing in the display; Engine shutdowns; Shutdown alarm icon flashing in the display
Possible Causes
- •Engine fails to start during the cranking period through 3 cranking cycles
- •Engine fails to start after 3 consecutive cranking cycles (10 seconds on and 10 seconds off per cycle)
- •Engine fails to start after 3 cranking cycles (10 seconds on, 10 seconds off per cycle)
- •Critical alarm conditions
- •Undesirable condition
- •Engine fails to start after 3 cranking cycles (10 seconds on and 10 seconds off per cycle)
Suggested Actions
- 1Remove the fault
- 2Press the STOP/RESET button to reset the module
Related Winco Fault Codes
ASK RUDY ABOUT THIS FAULT
Get a diagnosis walkthrough for FAILED TO START on your specific Winco unit — cited to the OEM manual, not a forum guess.
TRY IT FREE