ES

Possible Causes

• •AHET (Anticipatory high engine temperature) fault
• •ALOP (Anticipatory low oil pressure) fault
• •AUX (Auxiliary) fault
• •Auxiliary (AUX) fault (Terminal 26)
• •Batterycharger fault
• •ES (Emergency stop) fault
• •Emergency stop (ES) fault (Terminal 48)
• •Emergency stop switch is not connected across terminals TB1-1 and 1A
• •Emergency stop switch is not used and no jumper is installed
• •HET (High engine temperature) fault
• •High engine temperature (HET) fault (Terminal 36)
• •LF (Low fuel) fault
• •LOP (Low oil pressure) fault
• •LWT (Low water temperature) fault
• •Low battery volts
• •Low oil pressure (LOP) fault (Terminal 38)
• •OC (Overcrank) fault
• •OS (Overspeed) fault
• •Open circuit across emergency stop terminals TB1-1 and 1A
• •Overspeed (OS) fault (Terminal 39)

Suggested Actions

1. 1Activate audiovisual alarm or common fault relay
2. 2Connect battery charger alarm contact to TB1-62
3. 3Connect batterycharger alarm contact to TB1-61
4. 4Connect emergency stop across terminals TB1-1 and 1A
5. 5Connect fuel level sensor to TB1-63
6. 6Connect jumper across terminals 1 and 1A
7. 7Connect jumper across terminals 1 and 1A if emergency stop switch is not used
8. 8Use a remote annunciator and/or audiovisual alarm kit as an indicator with a dry contact kit connected to controller terminal strip TB1

Related Rehlko Fault Codes