32
UnclassifiedGeneral
What This Code Means
Open loop operation only; Drop in system performance; Drop in fuel efficiency
Possible Causes
- •Engine wiring harness pin circuit wiring or connectors issue (Pin 10 for 35 Pin MA 1.7 Metal-Cased ECU, Pin 11 for 24 Pin MSE 1.0 Plastic-Cased ECU, Pin 20 for 32 Pin MSE 1.1 Plastic-Cased ECU)
- •Oxygen sensor below the minimum operating temperature (375°C, 709°F)
- •Oxygen sensor connector or wiring problem
- •Oxygen sensor contaminated or damaged
- •Poor ground path from sensor to engine
- •Uncleared ECU fault codes after problem correction
Suggested Actions
- 1Disconnect the negative (-) battery cable from battery terminal, or remove the main fuse for the ECU for approximately 1 minute
- 2Reconnect the cable and tighten securely, or reinstall the main fuse
- 3Start the engine and allow it to run for several minutes (10-15 minutes of running may be required for codes 31, 32, 33, and 34 to reappear) to verify the MIL remains off
ASK RUDY ABOUT THIS FAULT
Get a diagnosis walkthrough for 32 on your specific KOHLER CO. unit — cited to the OEM manual, not a forum guess.
GET THE ANSWER
Free account required — we'll bring your question with you.